Roofing Systems - Chicago - Fox Valley - Chicagoland

At Advanced Roofing Inc., we believe that there is a proper roofing system for each individual building. Our philosophy is to install the possible roof in every situation. In selecting a right system for a building, we consider such factors as structural design, aesthetics, budget, and serviceability. We pride ourselves on developing a long-term working relationship with the building owner to make sure that the selected roof is a good fit.

Low Slope Roofing Systems

Built-Up Roofing

A built-up roof is composed of three elements: felt , bitumen, and surfacing. The felts which are made of glass, organic, or polyester fibers, serve much the same purposes reinforcing steel in concrete. The felts are necessary as tensile reinforcement to resist the extreme pulling force in the roofing materials. Felts installed in layer fashion also allow more bitumen to be applied to the whole system. Bitumen, either coal-tar of asphalt is the "glue" that holds the felts together. It is also the waterproofing material in the system. The surfacing normally is applied to build-up roofs smooth, gravel, slag, or a mineral-coating cap sheet. Gravel, slag may be embedded into the still-fluid flood coat. Gravel and slag serve as an excellent wearing surface to protect the membrane from mechanical damage. On some systems, a mineral coated cap sheet is applied on top of the plies of felt.

Modified Bitumen

This system was developed in Europe during the sixties and introduced in the U.S. in the early seventies. The term modified refers to the addition of plastic or rubber-based polymeric binders to asphalt to improve its performance and weatherability. Modified bitumen is used in multiple layers in what is essentially a "factory assembled" build-up roof. Several coats or laminations of modified bitumen are reinforcing mat, which is often covering with a granule-surface cap sheet, or left smooth for aluminum or white coating to be applied. Modified bitumen roofing exhibits many characteristics of built-up (BUR), yet affords the ease of application of a shingle-ply system. These membranes are resistant to heavy traffic, punctures, and tears.

Single-Ply EPDM

This thermostat membrane is compounded from rubber-polymer and is often referred to as rubber roofing. Some of the features that contribute to the popularity of EPDM single-ply roofing included long-term weatherability, including excellent resistance to temperature extremes, sunlight, ozone and moisture, ease, speed, and cleanliness of installation. This lightweight synthetic elastomer material has been used since the early 1970s.

Another feature is adaptability. Varied application techniques such as ballasted, fully adhered, and mechanically fastened, allow EPDM roofing systems to be applied to virtually any roof surface: flat, spherical, curved, or slanted.

Thermoplastics PVC/TPO Single-Ply

Thermoplastic single-ply membranes are revolutionizing the commercial and industrial roofing industry. They represent the fastest growing segment of the U.S. roofing market over the past five years. The PVC product is a reinforced membrane with tough solvent-or-hot-air welded seams. This material has excellent durability and dimensional stability. The TPO product advances the category yet another step by combing the hot-air welding benefits of EPDM, the more traditional single-ply material. Both PVC and TPO are aesthetically pleasing, lightweight, and highly resistant. Advanced Roofing Inc. is proud to include all of these new and technically advanced roofing systems.

Steep Slope Roofing Systems

Asphalt Shingles

There are a number of things to consider when selecting a new roof for your home. Of course, cost and durability head the list, but aesthetics and architectural style are important too. The right roofing system for your home is the one that balances those four considerations. Asphalt shingles take over an overwhelming share of the U.S. residential roofing market. Although shingles reinforced with organic felts have been around much longer, fiberglass-reinforced products have come to dominate the market. The fire resistance of asphalt shingles, like most other roofing materials, is categorized by Class A, B, or C. Class A is the most fire resistant, while Classes B and C have less. Generally, most fiberglass shingles have a Class A fire rating, while most organic have a Class C rating. Shingles reinforcement will have little effect on its appearance. Both organic and fiberglass products are available in laminated (architectural) grades that offer a textured appearance.

Organic Shingles

Consists of a wood-fiber base that is saturated with asphalt and coated with colored mineral granules. To fight fungus growth in warm, wet climates, they are available with special algaecide granules.

Fiberglass Shingles

Consists of a fiberglass mat, top and bottom layers of asphalt and mineral granules. Typically, fiberglass offers greater durability, but their manufacturer is important.

Laminated Dimensional Shingles

Are used for higher-budget applications. It is thicker, due to a lamination of more than one thickness of product. It also contains shadow lines, resembling a wood shake or slate shingle.

Advanced Roofing Inc. installs a variety of residential roofing systems. From a re-roof to a complete tear off, Advanced Roofing Inc. can add the beauty, value, and protection your family needs. We take the same pride in residential division as our commercial division, assuring detailed installation, quality products, and superb workmanship. Furthermore, all of our work is backed by a solid warranty. Please call or contact us for more information, product samples, and free estimate.